Geekvape Tengu RDA

Article number: 4627
Availability: Out of stock

The Tengu by GeekVape is a rebuildable dripping atomizer that pertains a unique building deck. This building deck consists of a gold plated "T" with dual trapezoid decks surrounding it. Flavor and clouds are unparallel to the Tengu as it can accommodate both round wires and flat wires with ease. Another notable aspect of this atomizer is the capability of bottom feeding. Although not pre-installed, utilizing the Tengu as a squonk RDA can be very pleasing aesthetically and usage wise.

Externally, the Tengue sizes at 24mm, making it perfect for any convenient style bottom feed devices. In the center of the Tengu, between the logo are dual isosceles trapezoids with a honeycomb style airflow system. This airflow system goes straight to the coil with the help of a notch locking system found on the build deck and top cap. This notches allow the two pieces to lock in place, enabling the airflow control that is hidden within the top cap. There are thirteen airflow slots and when adjusted, two slots at a time gets closed of. Moving downward, the Tengu comes pre-installed with a regular 510 pin, however this can be replaced with a 510 squonk capable pin that is included with the package. Atop the Tengu is a 10mm wide bore PMMA drip tip and can be changed with either the delrin 810 drip tip or any 510 drip tip with the included adapter.

Internally, the Tengu utilizes a unique build deck that consists of a "T" post and two other trapezoid posts around it. The "T" post comes with two unique features, the first is a slanted top piece that acts as a juice splitter; when dripping e-liquid through the drip tip, this acts as a splitter ensuring that each cotton gets saturated. The second is that when utilizing this RDA as a bottom feeder, juice will enter through the well hidden bottom side slots. Each terminals are large enough to accommodate clapton coils or round wire. This coils are held in securely by flat head screws (located on the top for the "T" post, and side for the trapezoid posts). A 6mm deep juice well presides on the build deck, ensuring that each cotton will keep saturated for long periods of time.

24mm Diameter
"T" Style Center Post Elevated Side Post Deck
Slanted Center for Filling Through Drip Tip
Gold Plated "T" Terminals
Dual Terminals
3mm by 2mm Per Terminals
Coils Held Down by Top Mounted Flathead Screws
Elevated Side Terminals
Single Terminal Each
3mm by 4mm Per Terminal
Coils Held Down By Side Mounted Flathead Screws
PEEK Insulator
Hidden Squonk Slots on "T" Post
Isosceles Trapezoid Honeycomb Style Airflow Design
1mm by 1mm Each Airflow Slot
13 Airflow Slots Total
Fully Closeable
Notch Assisted Adjustment
Gold Plated 510 Contact
Squonk 510 Pin Included
810 Drip Tip
10mm Wide Bore PMMA Drip Tip
10mm Wide Bore Delrin Drip Tip
One GeekVape Tengu RDA
One 810 PMMA Drip Tip
One 810 Delrin Drip Tip
One 510 Drip Tip Adapter
One 510 Squonk Pin
One N80 Fused Clapton
0.4 ohm
Four Feather Cotton
Spare Parts and O-Rings
One T-Tool
User Manual

0 stars based on 0 reviews